Autoclave Spore Test Failure – Precautions And How To Prevent It
by dewi susanti
Have you experienced an autoclave spore test failure? Then you conceivably understand that this is a serious concern. Whenever an autoclave fails a spore test, it is an alarming situation. Some causes of autoclave failure may be beyond your control, like a broken pressure gauge or a heating element.
However, more often than not, the failures are mainly because of some silly mistakes, like:
• Poorly wrapping your instruments
• Forgetting to set the timer
• Overloading the autoclave
• Lack of adequate pressure maintenance, etc.
Whatever the cause, a number of things need to be done whenever an autoclave fails a biological spore test. Let’s have a look at some of the precautions required during such occurrences.
Do Not Use the Autoclave
Although obvious, this step deserves a mention – just for emphasis. This is the very first thing to do once you’ve noticed some faulty operational functionalists. No matter how small’ the problem may be, you still need to be 100 percent sure your autoclave works properly.
Perform a Second Test
It is advisable that you repeat the autoclave spore test, just in case the first was an error. This is to confirm whether your autoclave is really faulty or not. If the indications are positive (working properly), then do another final test – for final certainty. But if the second test fails again, then you have no alternative but to contact the authorities.
Contact the Proper Regulatory Agency
Once you have a failed autoclave spore test, you are obliged to make contact with the right regulatory authorities. Here, you’ll have to make a report letting them know what’s going on, and how you are planning on dealing with the situation.
You’ll as well be mandated to keep tabs and document every test you’ve been handling for a period not less than 2 years before.
Only Use Sterilized Instruments, If Need Be
Since your autoclave doesn’t work, or you are not sure if it works, you can only use sterilized instruments. On the hand, if you cannot verify the sterilization of an instrument, then it’s prudent you don’t carry out any medical performances.
How to Avoid Future Test Failures
The aforementioned steps are the steps taken whenever an autoclave spore test fails. So, what are some of the things you can do to avoid future blunders when it comes to autoclaves, and evade a failed spore test.
1. Train Your Staff
Having a staff that completely understands and knows exactly how to use the autoclave is the best way to avoid mishandling, thus reduced chances of failed tests.
2. Put Someone in Charge
Pick one person to be in charge of the machine, and entrust him or her with the responsibility of taking good care of the autoclave. Instill the duty of documenting every testing process, along with the necessary paperwork.
3. Setup a Testing Schedule
Choose a date and day every week, where you get to perform tests. Make it a routine. This way, you never miss on any defective issue(s) related to the autoclave.
4. Clean Air Jet Valve
Poor care of the valve is probably the most common cause for a failed autoclave spore. The valves are easily clogged, thus make it a routine to clean out the valve on a regular basis.
Generally, an autoclave spore failure needs to be handled with a lot of care. Although there are some minor errors you can repair on your own, contacting the necessary authority is the right thing to do, especially if you are not good with machines.
Incoming search terms:
- my autoclave does not sterilize duo spore
- spore test failed in autoclave
- spore test failed in autoclave what next