Reliable Tips on the Maintenance of Autoclave Fittings

by: dewi susanti

Autoclave fittings need to be taken very good care of and be maintained in the best way possible. This is very important in that it helps in ensuring that the efficiency of an autoclave is maintained at its best always. Regular maintenance of these fittings is also necessary as it helps in reducing the need for repairs thereby lowering repair costs incurred. For you to know how to take care of sterilizer fittings it is necessary to understand how these sterilizers work. For starters, it is important to understand that sterilizers use pressurized steam in order to kill micro-organisms on the surfaces of medical equipments. Most sterilizers use a pressure of 15 psi (pounds per square inch) and temperatures of up to 250 Degrees Celsius. These conditions make sterilizer fittings to be very prone to damages thus necessitating the need for regular maintenance.

 autoclave aittings

Tips on how autoclave fittings include:

Clean the filters regularly

Filters in sterilizers should be cleaned from time to time preferably on a regular basis. This is both for air and water filters. The best thing about cleaning filters is that it unblocks the pores in the filters thus allowing smooth flow of air and water into and out of the sterilizer. With time, even distilled water and the air used in sterilizers can cause filters to be clogged up and hence become blocked. When there is clogging up in the filters, the sterilizer develops mechanical problems thus not being fully efficient.

Clear drains and lines in the sterilizer

Sterilizers have drains for both water and air. Just like the filters, these drains can also become clogged with time thereby affecting the performance of the sterilizer. To prevent such an occurrence from happening, it is usually important to regularly clear drains and lines in the autoclave. Clogging in these drains does not only affect the performance of the sterilizer but could also form a yielding ground for bacteria and other dangerous micro-organisms.

Drain the reservoir

After the completion of every sterilization cycle, it is usually important to ensure that you drain the reservoir. This is because when water in the drainer is let to stand for long, it could form a breeding ground for microorganisms such as bacteria and viruses. In addition to this, it is also advisable that you should wipe the interiors of the sterilizer’s chambers after every use.

Autoclave fittings are designed to make the sterilization process easy and efficient. The main purpose of maintaining these fittings in their best condition is so that the sterilizer is able to achieve its purpose- kill microorganisms like bacteria, viruses and fungi. This maintenance has also been noted to be quite efficient in lowering the operation and repair costs associated with sterilizers. With efficiently working fittings, factors like power consumption are greatly minimized. In sterilizers that use high pressures such as over 150,000 psi, it is important to ensure that there are no leaks on air lines in the sterilizers. This is because such leaks can easily result into massive losses if not taken care of well in the earliest possible instance.